BIS ISI Certification

  • Overview
  • Benefits
  • Document Required
  • Fees And Timeliness
  • Process To Apply
  • FAQs

how it works

ISI/BIS Certification, also known as Indian Standards Institution (ISI) certification or Bureau of Indian Standards (BIS) certification, is a quality certification program in India.

Overview of BIS ISI Certification

This certification is governed by the BIS, a statutory body established under the Bureau of Indian Standards Act 1986. Its primary purpose is to ensure the quality, safety, and reliability of products sold in India. BIS/ISI Certification encompasses a wide range of product categories, including electronics, appliances, food products, and industrial goods.

Manufacturers seeking BIS/ISI Certification must ensure that their products comply with specific quality and safety standards set by the BIS. This typically involves rigorous testing at BIS-recognized laboratories to verify that the products meet the prescribed Indian standards. Upon successful compliance, the products are granted BIS/ISI certification, which is marked by the ISI mark. This ISI mark serves as visible proof of conformity with Indian standards and signifies product reliability.

BIS/ISI Certification is often a mandatory requirement for products sold in India, and non-compliance can lead to legal consequences, including product confiscation, fines, and legal actions against manufacturers. Manufacturers, both domestic and international, should consider BIS/ISI Certification an essential requirement to enter and succeed in the Indian market.

It assures consumers of product quality and safety, fostering confidence in the products and enhancing market access for manufacturers. To maintain certification, manufacturers must continually adhere to BIS standards, including undergoing periodic audits and testing to ensure ongoing compliance.

Benefits of BIS ISI Certification

  • BIS/ISI Certification is a mandatory requirement for various product categories in India. It allows manufacturers to legally sell their products in the Indian market, one of the world's largest and fastest-growing consumer markets.
  • Products carrying the BIS/ISI mark are perceived as high quality and safe. This certification instils confidence in consumers, leading to increased sales and brand loyalty.
  • anufacturers who meet BIS/ISI standards demonstrate a commitment to safety and quality. This can reduce their liability in the event of product-related incidents.
  • BIS/ISI Certification can facilitate the acceptance of products in international markets, as it reflects adherence to recognized standards and quality.
  • Complying with BIS/ISI standards ensures manufacturers adhere to Indian regulations. Non-compliance can result in severe legal consequences, making BIS/ISI Certification a necessary requirement.

iKargos.com specializes in guiding manufacturers through the BIS/ISI Certification process. With our expertise, you can navigate the certification process seamlessly, ensuring your products are compliant, reliable and ready for deployment

Documents Required for BIS ISI Certification

  • Main Application Form 
    (Primary factory and product category information)
  • ISI Application Fee 
    (Copy of Remittance / Payment Advice)
  • Copy of Test Report done within a month by internal laboratory 
    (Indicating product compliance with the relevant Indian Standard) 
  • Proof of Manufacturing Unit's Address 
    (Factory License or Tax Registration document specifying the manufacturer's scope)
  • Trade Mark Registration, if available  
    (Copy of Trademark Registration)
  • Certificate from concerned regulatory agencies for manufacturing 
    (If applicable)
  • Product Drawings  
    (As applicable)
  • Current Manufacturing Capacity 
    (Production capacity)
  • Raw Material Details 
    (Component names, supplier names, component quality certifications)
  • Machine Details 
    (Machine names, manufacturers, capacities, quantities)
  • Factory Layout Plan
    (Floor plan and technical layout)
  • Manufacturing Process Details
    (Flowchart of the manufacturing process, including any outsourcing)
  • Packaging Information 
    (Packaging size and quantity, storage facilities)
  • Details of Testing Equipment 
    (Equipment names, sizes, quantities, calibration status, and calibration date)
  • Quality Control (QC) Staff Details 
    (Employee names, qualifications, designations, years of experience)
  • Procedure for Handling Substandard Products
    (After manufacturing)
  • Organizational Chart of the Factory 
    (List of management personnel with names and designations in chart format)
  • Factory Location Map 
    (Showing the distance from the airport and city center)
  • Specific Requirements for Foreign Manufacturers 

Note: Separate application must be submitted for each product/Indian Standard and this applies to each factory location.

SNO. Particular Description List of Required Information
1 Application Form - V download
2 FAQs on Marking on Wheel Rims download
3 Guideline on Plugs and Socket-outlets-IS 1293 download
4 Guidelines on BIS Certification for Footwear Manufacturers download

Fees and Timeline

Fees

For a customized and attractive quotation, please contact us with your product details to Kapish Laur (+91- 99717 70603) or Rekh Atri (+91 98118 03136) or Manju Laur (+91 9711994042).

Timeline

The certification process timeline typically takes around 4-6 weeks, Early preparation and collaboration can help manage potential delays, ensuring a smooth and successful certification process.

Process for BIS ISI Certification for Foreign Manufacturer

Step 1:  Application Submission

  • Gather all the necessary documents
  • Submit the application fee along with the documents
  • Allotment of Application Number
  • Application scrutiny within the specified timeframe

Step 2:  Query Raised (If Any)

  • Notification regarding any missing documents or non-compliance
  • Submission of a response within the designated period

Step 3:  Inspection (Audit)

  • Payment of the Inspection/Audit Fee
  • Selection of an Inspecting Officer
  • Scheduling the itinerary based on availability
  • Conducting a 3-man-day inspection of the manufacturing unit to assess the testing facilities

Step 4:  Sample Testing

  • Examination of samples on the factory premises during the audit
  • Sealing and collection of samples to be sent to a BIS-approved Laboratory
  • Receipt of Test Reports by BIS (FMCD)

Step 5:  Grant of License

  • Confirmation of sample passage and notification to pay the Marking Fee and License Fee
  • Issuance of a Letter granting the License

Step 6: Indemnity & PBG

  • Signed Agreement or Indemnity Bond by the Authorized Indian Representative
  • Submission of a Performance Bank Guarantee (PBG) amounting to USD 10,000

Note: Payments should be made in USD to the BIS Account.

 

Process for ISI/BIS Certification for Indian Manufacturer

Option 1

The license issuance process is expected to be completed within 120 days, except for the first all-India case, where it may take 180 days. This timeframe begins from the date of receiving the application, provided that the documentation, unit assessment, and product compliance are satisfactorily established at the first instance during various stages. Here are the steps involved:

Step 1:  Customizing the Manufacturing Unit as per the relevant Indian Standard

  • Identifying the applicable Indian Standard
  • Establishing in-house testing facilities to meet the Standard's requirements

Step 2: Filing the Application Form

  • Preparing the Internal Test Report of the product according to the relevant IS
  • Compiling all necessary documents
  • Completing the online Application Form
  • Making the online application fee payment directly to BIS
  • Submitting hard copies of the Application Form with all enclosures to the relevant Branch Office (BO) of BIS

Step 3:  Remitting Audit Fees & Travelling Expenses for Inspection

  • Paying the audit fees for inspection
  • Confirming the BIS Inspection Team
  • Coordinating travel, accommodation and boarding for the visiting team

Step 4:  Factory Visit

  • Conducting an assessment of the manufacturing infrastructure, production process, quality control, and testing capabilities during a factory visit
  • Selecting random sample(s) for testing in a BIS Approved Lab allocated by the BIS office

Step 5:  Organizing the Lab Test Report (LTR)

  • Submitting the samples collected by the visiting team to the allocated laboratory, along with the testing fee

Step 6: Closure of Non-Conformity (if any) and Remittance of Official Fees

  • Rectifying any issues pointed out by the inspection team regarding the factory unit's processes
  • Submitting proof of rectification to close non-conformities, if any
  • Paying the annual marking fees (annual license fees) to BIS

Step 7 : Obtaining the BIS (ISI) Certificate

  • The license is granted upon evidence of steps 4 to 6

 

Option 2

The license issuance process is expected to be completed within 30 days from the date of application receipt if the factory visit is satisfactory and the sample conforms to the relevant Indian Standard(s) at the first instance. Here are the steps involved:

Step 1:  Customizing the Manufacturing Unit as per the relevant Indian Standard

  • Identifying the applicable Indian Standard
  • Establishing in-house testing facilities to meet the Standard's requirements

Step 2:  Sample Testing 

  • Arrange the required certificate for raw material (MTC)
  • Get the product sample tested in BIS recognized testing lab

Step 3:  Filing the Application Form

  • Preparing the Internal Test Report of the product, following the reference test report provided by BIS for your guidance
  • Compiling all necessary documents
  • Completing the online Application Form
  • Making the online application fee payment directly to BIS
  • Submitting hard copies of the Application Form with all enclosures to the relevant Branch Office (BO) of BIS

Step 4:  Remitting Audit Fees & Travelling Expenses for Inspection

  • Paying the audit fees for inspection
  • Confirming the BIS Inspection Team
  • Coordinating travel, accommodation and boarding for the visiting team

Step 5:  Factory visit

  • Conducting an assessment of the manufacturing infrastructure, production process, quality control and testing capabilities during a factory visit
  • Selecting random sample(s) for testing in a BIS Approved Lab allocated by the BIS office

Step 6:  Submitting the Sample for Testing

  • Submitting the sample to the allocated lab and paying the testing fee
  • Receiving an acknowledgement from the lab and submitting it to the BIS office

Step 7: Obtaining the BIS (ISI) Certificate

  • Paying the annual marking fees (annual license fees) to BIS
  • BIS will issue the ISI Certificate

Step 8: Closure of Non-Conformity (if any)

  • Rectifying any issues pointed out by the inspection team regarding the factory unit's processes

 

Important Note:

In the case of non-conformity with the sample(s) drawn during the factory visit under Option 2, the license will be suspended immediately. The licensee must take corrective actions and inform the Bureau. They must also confirm their readiness to provide new samples manufactured after taking corrective actions. The suspension will only be revoked based on conforming Testing Reports of the fresh samples from a BIS Recognized Testing Laboratory.

If the fresh sample tested by the Bureau for revoking the suspension exhibits non-conformity in laboratory testing, or if the licensee does not report corrective actions taken and does not provide improved samples within 30 days of the suspension date, the license will be considered for cancellation

Following products are covered under Compulsory Registration Scheme:

S.No. Product Name Indian Standard
  Cement  
1 Ordinary Portland Cement IS 269: 2015
2 Sulphate Resisting Portland Cement IS 12330: 1988
3 Low Heat Portland Cement IS 12600: 1989
4 Portland Pozzolana Cement-Part1 Fly-ash based IS 1489 (Part-1)
5 Portland Pozzolana Cement-Part 2 Calcined clay based IS 1489 (Part-2): 2015
6 Masonry Cement IS 3466: 1988
7 Portland Slag Cement IS 455: 2015
8 High Alumina Cement for Structural Use IS 6452: 1989
9 Super Sulphated Cement IS 6909: 1990
10 Rapid Hardening Portland Cement IS 8041: 1990
11 White Portland Cement IS 8042: 2015
12 Hydrophobic Portland Cement IS 8043: 1991
13 Oil Well Cement IS 8229: 1986
14 Composite Cement-Specification IS 16415: 2015
15 Microfine Ordinary Portland Cement-Specification IS 16993: 2018
16 High Alumina Refractory Cement IS 15895: 2018
  Household Electrical Goods  
17 PVC insulated cables for working voltages upto and including 1100 V IS 694:2010
18 Residual current operated circuit breakers for household and similar uses-Part 1 Circuit breakers without integral overcurrent protection (RCCBs) IS 12640 (Part-1): 2016
19 Residual current operated circuit breakers for household and similar uses-Part 2 Circuit breakers with integral overcurrent protection(RCVOs) IS 12640 (Part-2): 2016
20 AC watt-hour meters, class 0.5, 1 and 2 IS 13010: 2002
21 AC static watt-hour meters, class 1 and 2 IS 13779:2020
22 AC Static Transformer operated Watt-hour and VAR-hour meters, class 0.2S and 0.5S IS 14697:2021
23 Self Ballasted Lamps for General Lighting Services Part 1-Safety Requirements and Part 2-Performance Requirements IS 15111 (Part-1 & 2): 2002
24 Safety of household and similar electrical appliances-Electric iron IS 302 (Part-2/Sec-3): 2007
25 Electric immersion water heaters-Safety of household and similar electrical appliances IS 302 (Part-2/Sec-201): 2008
26 Electric stoves-Safety of household and similar electrical appliances IS 302 (Part-2/Sec-202): 1992
27 Room Heaters-Safety of household and similar electrical appliances IS 302 (Part-2/Sec-30): 2007
28 Switches for domestic and similar purposes IS 3854: 1997
29 Tungsten filament general service electric lamps (upto 100 W) IS 418: 2004
30 Electrical Accessories-Circuit breakers for overcurrent protection for household and similar installations IS/IEC 60898-1: 2015
31 Elastomer Insulated Cables (Part-1) for working voltages up to and including 1100 V IS 9968 (Part-1): 1988
  Batteries  
32 Multi-purpose Dry Batteries ( Classification-R03, R6, R14 and R20 ) IS 8144: 2018
  Food & Related Products  
33 Follow-up Formula Complementary Foods IS 15757: 2022
34 Processed cereal based complementary foods IS 11536: 2022
35 Milk Powder IS 1165: 2022
36 Condensed milk, partly skimmed and skimmed condensed milk IS 1166: 2022
37 Skimmed milk-powder, standard grade IS 13334 (Part-1): 2014
38 Skimmed milk-powder, extra grade IS 13334 (Part-2): 2014
39 Packaged Natural Mineral Water IS 13428: 2005
40 Infant milk substitutes IS 14433: 2022
41 Partly skimmed milk powder IS 14542: 1998
42 Packaged Drinking Water (Other than Packaged Natural Mineral Water) IS 14543: 2016
43 Milk-cereal based weaning foods IS 1656: 2022
44 Hexane, Food grade IS 3470: 2017
45 Plastic Feeding Bottles IS 14625: 2015
46 Glass Feeding Bottles IS 5168: 2018
  Oil Pressure Stoves  
47 Oil pressure stove, offset burner type IS 10109: 2018
48 Multi-burner oil pressure stoves IS 2787: 2006
49 Oil pressure stoves IS 1342: 2019
  Automobile Accessories  
50 Automotive Vehicles Tubes for pneumatic tyres IS 13098: 2012
51 Automotive vehicles-Pneumatic tyres for two and three-wheeled motor vehicles IS 15627: 2022
52 Automotive vehicles-Pneumatic tyres for passenger car vehicles-Diagonal and radial ply IS 15633: 2022
53 Automotive vehicles-Pneumatic tyres for commercial vehicles-Diagonal and radial ply IS 15636: 2022
  Cylinder, Valves and Regulator  
54 Liquefied petroleum gas containers for automotive usec IS 14899: 2014
55 Multifunction valve assembly for permanently fixed liquefied petroleum gas (LPG) containers for automotive use IS 15100: 2018
56 Welded low carbon steel cylinders exceeding 5 litre Water capacity for low pressure liquefiable gases Part 4 Cylinders for toxic and corrosive gases IS 3196 (Part-4): 2001
57 Welded low carbon steel gas cylinder exceeding 5 litre water capacity for low pressure liquefiable gases Part 1 Cylinders for LPG IS 3196 (Part-1): 2013
58 Welded low carbon steel gas cylinder exceeding 5-litre water capacity for low pressure liquefiable gases Part 2 Cylinders for liquefiable gases other than LPG IS 3196 (Part2): 2006
59 Valve fittings for compressed gas cylinder excluding liquefied petroleum gas cylinders IS 3224: 2021
60 Yoke Type Valve Connection for Small Medical Gas Cylinders IS 3745: 2006
61 Welded low carbon steel cylinders for low pressure liquefiable gases not exceeding 5 litre water capacity IS 7142: 1995
62 Refillable Seamless steel gas cylinders Part 1 Normalized steel cylinders IS 7285 (Part-1): 2018
63 Refillable Seamless steel gas cylinders Part 2 Quenched and tempered steel cylinders with tensile strength less than 1100 MPa IS 7285 (Part-2): 2017
64 Valve fittings for gas cylinder valves for use with breathing apparatus IS 7302: 2018
65 Welded and seamless steel dissolved acetylene gas cylinders IS 7312: 2018
66 Valve fittings for use with liquefied petroleum gas cylinders of more than 5 litre water capacity Part 2 Valve fittings for newly manufactured LPG cylinders IS 8737: 2017
67 Valve Fittings for Use with Liquefied Petroleum Gas (LPG) Cylinders upto and Including 5-Litre Water Capacity IS 8776: 1988
68 Low pressure regulators for use with liquefied petroleum gas (LPG) mixtures IS 9798: 2013
  Medical Equipment  
69 Clinical thermometers Part 1-Solid stem type IS 3055 (Part-1): 1994
70 Clinical thermometers Part 2-Enclosed scale type IS 3055 (Part-2): 2004
71 Diagnostic Medical X Ray Equipment IS 7620 (Part-1): 1986
  Steel and Iron Products  
72 Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement (Part 1) Mild steel and medium tensile steel bars IS 432 (Part 1):1982
73 Mild steel and Medium Tensile steel bars and Hard-Drawn Steel Wire for Concrete Reinforcement (Part 2) Hard-Drawn Steel Wire IS 432 (Part 2): 1982
74 Stainless Steel Bars and Flats IS 6603: 2001
75 Bright steel bars-Specification IS 9550:2001
76 Specification for High Tensile Steel Bars used in Pre-stressed Concrete IS 2090:1983
77 Chrome molybdenum steel bars and rods for aircraft purposes IS 963: 1958
78 Steel Wire for Nipples for Spokes IS 8564: 1977
79 Stress-Relieved, Low Relaxation Steel Wire for Pre-stressed Concrete IS 16644: 2018
80 Trapezoidal Steel Wire for Springs Washers IS 12262:1988
81 Plain Hard-drawn Steel Wire For Pre-stressed Concrete Part 1 Cold Drawn Stress-relieved Wire IS 1785 (Part 1) : 1983
82 Plain hard-drawn steel wire for pre-stressed concrete Part 2 as drawn wire IS 1785 (Part 2) : 1983
83 Mild steel wire rods for general engineering purposes IS 7887:1992
84 Mild steel wire for cotter pins IS 10794:1984
85 Steel Wire for Reeds IS 8566: 1977
86 Half Round Mild Steel Wire for The Manufacture of Split Pins IS 8563: 1977
87 Tinned Steel Wire for Banding of Armatures And Rotors Part-3 Specific Requirements for non-magnetic banding wires IS 8510 (PartIII): 1977
88 Steel Wire for Banding Of Armatures And Rotors Part-2 Specific Requirements for magnetic banding wires IS 8510 (Part II): 1977
89 Hard Drawn Steel Wire for Upholstery Springs IS 2589: 1975
90 High Carbon Steel Wire Rods IS 7904:2017
91 Mild steel wire for General Engineering purposes IS 280: 2006
92 Round Steel wire for ropes IS 1835:1976
93 Low Carbon Galvanized steel wires formed wires and Tapes for armouring of Cables IS 3975:1999
94 Steel wire for mechanical springs Part-1 cold drawn unalloyed steel wire IS 4454 (Part 1) : 2001
95 Steel wire for mechanical springs Part-2 oil hardened and tempered steel wire IS 4454 (Part 2): 2001
96 Stainless Steel wire Rod IS 6527:1995
97 Stainless Steel Wires IS 6528:1995
98 Specification for Mild Steel Wire, Cold Heading Quality IS 1673: 1984
99 Specification for Carbon Steel Wire for the Manufacture of Wood Screws IS 1812: 1982
100 Specification for Mild Steel Wire Rod for the Manufacture of Machine Screws IS 2255: 1977
101 Specification for Steel Wire for Umbrella Ribs IS 4223: 1975
102 Specification for Steel Wire for Staples, Pins and Clips IS 4224: 1972
103 Specification for Steel Wire for spokes IS 6902: 1973
104 Specification for Steel Wire ( up to 20 mm ) for the manufacture of cold-forged rivets IS 7557: 1982
105 Steel Cast Billet Ingots, Billets and Blooms for production of High Carbon Steel Wire Rods-Specification IS 8951: 2001
106 Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes-Specification IS 8952: 1995
107 Specification for Steel Wire for Needles IS 9962: 1981
108 Specification for Low Carbon Steel Wire for Rivets for use in Bearing Industry IS 4882: 1979
109 Specification for Hard-drawn Steel Wire Fabric for Concrete Reinforcement IS 1566:1982
110 Steel Wires for Mechanical Springs Part-4 Stainless Steel Wire IS 4454 (Part 4): 2001
111 Steel tubes for structural purposes IS 1161:2014
112 Steel Tubes, Tubulars and Other Wrought Steel Fittings Part 1-Steel Tubes IS 1239 (Part 1): 2014
113 Steel tubes used for water-wells (upto 200 mm dia) IS 4270:2001
114 Fusion bonded epoxy coated reinforcing bars IS 13620:1993
115 Galvanized steel sheets (plain and corrugated) IS 277:2003
116 Uncoated Stress Relieved Low Relaxation Seven-ply Strand For Pre-stressed Concrete IS 14268:1995
117 Indented wire for Pre-stressed concrete IS 6003:2010
118 Uncoated stress relieved strand for Pre-stressed concrete IS 6006:2014
119 Oriented Electrical Steel Sheet and Strip Semi-Processed Type IS 15391:2003
120 Steel plates for pressure vessels for intermediate and high temperature service including boilers IS 2002:2009
121 Steel plates for pressure vessels used at moderate and low temperature IS 2041:2009
122 Hot rolled medium and high tensile structural steel IS 2062:2011
123 Carbon steel cast billet ingots, billets, blooms and slabs for rerolling into steel for general structural purpose IS 2830:2012
124 Cold rolled non-oriented electrical steel sheets and strip-fully processed type (CRNO) IS 648:2006
125 Grain oriented electrical steel sheet and strip (CRGO) IS 3024:2015
126 Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage IS 8329 : 2000
127 Ductile iron fittings for pressure pipes for water, gas and sewage IS 9523:2000
128 Mild steel for metal arc welding electrodes IS 2879:1998
129 Steel Chequered Plates IS 3502:2009
130 Hot Rolled Steel Plate (upto 6 mm) Sheet and Strip for the Manufacture of Low Pressure Liquefiable Gas Cylinders IS 6240: 2008
131 Hot rolled steel narrow width strip for welded tubes and pipes IS 15647:2006
132 Cold reduced carbon steel sheets and strips Part 1 Cold Forming and Drawing Purpose IS 513 (Part-1): 2016
133 Hot Rolled Carbon Steel Sheet and Strip IS 1079: 2017
134 Carbon steel billets, blooms, slabs and bars for forgings IS 1875:1992
135 Hot Rolled Steel Flat Products for Structural Forming and Flanging Purposes IS 5986: 2017
136 Hot Rolled bars for production of bright bars and machined parts for engineering applications IS 7283:1992
137 Hot Rolled Steel Strip for Welded Tubes and Pipes IS 10748:2004
138 Hot Rolled Carbon Steel Strip For Cold Rolling Purposes IS 11513:2017
139 Continuously Pre-Painted Galvanized Steel Sheet and Coils IS 14246:2013
140 Pre-Painted Aluminium Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain) IS 15965:2012
141 Stainless Steel Sheets and Strips for Utensils IS 5522:2014
142 Stainless Steel Plate, Sheet and Strip-Specification IS 6911:2017
143 Low Nickel Austenitic Stainless Steel Sheet and Strip for Utensils and Kitchen Appliances-Specification IS 15997:2012
144 Cold reduced carbon steel sheets and strips Part 2 High Tensile and Multi-phase Steel IS 513(Part-2):2016
145 Alloy Steel billets, blooms and slabs for forging for general engineering purposes IS 4368:1967
146 Steels for Cold Heading or Cold extrusion application Part-1 Wrought carbon and low alloy steels IS 11169 (Part 1): 1984
147 Structural Weather Resistant Steel IS 11587:1986
148 Fire resistant Steel-Specification IS 15103: 2002
149 Hot Dip aluminum-Zinc alloy metallic coated steel strip and sheet (Plain) IS 15961:2012
150 Structural Steel for Building for Structures with improved seismic Resistance IS 15962:2012
151 Ferrosilicon-Specification IS 1110 : 1990
152 Specification for Ferronickel IS 4409 : 1973
153 Specification for Hot rolled steel strip (bailing) IS 1029 : 1970
154 Specification for Hot-rolled mild steel sheet and strip in coil form for cold-reduced tinplate and cold-reduced black plate IS 2385 : 1977
155 Specification for Structural steel for construction of hulls of ships IS 3039 : 1988
156 Tool and die steels-Specification IS 3748 : 1990
157 Steel for hardening and tempering-Specification IS 5517 : 1993
158 Specification for Steel for valves for internal combustion engines IS 7494 : 1981
159 Specification for High speed tool steels IS 7291 : 1981
160 Specification for Carbon manganese steel forgings for pressure vessels IS 12146 : 1987
161 Magnetic materials-specification for individual material-Fe based amorphous strip delivered in the semi-processed state IS 16585 : 2016
162 Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (ordinary quality)-Specification IS 2831 : 2012
163 Steel Rivet Bars (Medium and High Tensile) for Structural Purposes IS 1148: 2009
164 Stampings / laminations / cores of transformers (with or without winding) made from-Grain Oriented Electrical Steel Sheet and Strip or Cold Rolled Non-oriented Electrical Steel Sheet and Strip ( Scheme-IV ) IS 3024/IS 648
165 Steel For the Manufacture of Volute And Helical Springs ( for Railway Rolling Stock )-Specification IS 3195: 1992
166 Steel for the manufacture of Laminated Springs ( Railway Rolling Stock ) Part-1 Flat Sections-Specification IS 3885-Part-1: 1992
167 Specification for Steel for the manufacture of volute, helical and laminated springs for automotive suspension IS 3431: 1982
168 Steel for the manufacture of Laminated Springs ( Railway Rolling Stock ) Part-2 Rib and Groove Sections-Specification IS 3885-Part- 2: 1992
169 Cold-rolled Carbon Steel Strips for Ball and Roller Bearing Cages or Retainers-Specification IS 4397: 1999
170 Carbon-chromium Steel for the Manufacture of Balls, Rollers and Bearing Races-Specification IS 4398: 1994
171 Specification for Steel For Electrically Welded Round Link Chains IS 6967: 1973
172 Specification for Cold rolled medium, high carbon and low alloy steel strip for general engineering purposes IS 7226: 1974
173 Steel ingots, billets and blooms for the production of springs, rivets and screws for general engineering applications-Specification IS 8052: 2006
174 Specification for Cold rolled steel strips for carbon steel razor blades IS 9476: 1980
175 Specification for Cold-rolled Carbon Steel Strips or Coils for Manufacture of Welded Tubes IS 12367:1988
176 Steels for High Temperature Bolting Applications-Specification IS 14331:1995
177 Low carbon high strength cold rolled steel sheets and coils for cold forming-Specification IS 14491:1997
178 Stainless Steel Blooms Billets and Slabs for Forging IS 6529:1996
179 Cold-Rolled Stainless Steel Strips for Razor Blades IS 9294:1979
180 Stainless Steel for Welding Electrode Core Wire IS 10631:1983
181 Non-Magnetic stainless steel for electrical applications Part-2 Specific requirements for binding wire IS 10632 (Part 2): 1983
182 Non-Magnetic stainless steel for electrical applications Part-3 Specific requirements for sheets, strips and plates IS 10632 (Part 3):1983
183 Steels for cold heading or cold extrusion applications-Specification Part-2 Stainless steel IS 11169 (Part 2): 1989
184 Steels for Pneumatic Tools IS 5651:1987
185 Heat Resisting Steels IS 9516:1980
186 Steels For Piston Pins ( Gudgeon Pins ) IS 11952:1986
187 Alloys used in Electrical Resistance Metallic Heating Elements IS 12045:1987
188 18 Percent Nickel Maraging Steel Bars and Rods IS 14652: 1999
189 Carburizing Steels for use in Bearing Industry IS 5489: 1975
190 Soft Magnetic Iron Strips IS 11946:1987
191 Soft Magnetic Iron Rods, Bars Flats and Sections IS 11947: 1987
192 Cold-reduced Electrolytic Tin Plate IS 1993 : 2018
193 Cold-reduced Electrolytic Chromium or Chromium oxide-coated steel IS 12591: 2018
194 Malleable iron shots and grits for use in foundries-Specification IS 9139: 1979
195 Expanded Metal Steel Sheets For General Purposes IS 412: 1975
196 Steel Billets, Bars and Sections For Boilers IS 2100: 1970
197 Mild Steel Rivet Bars for Ship Building IS 3298: 1981
198 Steel for Spring Washers IS 4072: 1975
199 Heald Wire IS 8565: 1977
200 Plates for Galvanizing Pots IS 8917: 1978
201 Hot Rolled Steel Plates Sheets and Strips for Manufacture of Agricultural Discs IS 9442: 1980
202 Cold-Reduced And Hot-Rolled Carbon Steel Sheet for Porcelain Enamelling IS 9485: 1980
203 Hot-Dip Terne Coated Carbon Steel Sheets IS 12313: 1988
204 Structural Steel (Ordinary Quality) IS 15911:2010
205 Mould Steels IS 4430: 1979
206 Carbon and Carbon-Manganese Free-Cutting Steels IS 4431: 1978
207 Case Hardening Steels IS 4432: 1988
208 Steels for Die Blocks for Drop Forging IS 5518: 1996
209 Forged or Rolled CTC Segments IS 8748: 1978
210 Quenched and Tempered Alloy Steel Forgings for Pressure Vessels IS 12145: 1987
211 Tool Steel Forgings for Metal Forming IS 13387: 1992
212 Carbon and Low Alloy Billets, Blooms, Slabs and Bars for Manufacture of Shell Bodies and Proof Shots Used In Defence Servicess IS 14698:1999
213 Cold-Reduced tinmill products-Blackplate IS/ISO 11951 : 2016
214 Flame and Induction Hardening Steels IS 3930: 1994
215 Thermostat Metal Sheet and Strip IS 5478: 1969
216 Stock for Forgings produced from Continuously Cast Blooms, Billets and Slabs IS 13352: 1992
217 Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheets and Strips IS 17404 : 2020
218 Bead Wires for Tyres IS 4824:2006
219 High Tensile Strength Flat Rolled Steel Plate (Up to 6 mm), Sheet and Strip for the Manufacture of Welded Gas Cylinder IS 15914:2011
220 Specification for Cold-rolled Steel Strips For Springs IS 2507: 1975
  Electrical Transformers  
221 Outdoor Type Door Oil Immersed Distribution Transformers upto and including 2500 kVA, 33 kV-Specification Part 1 Mineral Oil Immersed IS 1180 (Part 1): 2014
  Electrical Motors  
222 Energy Efficient Induction Motors-Three Phase Squirrel Cage IS 12615 : 2018
  Capacitors  
223 Power Capacitors of Self-Healing Type for AC Power Systems having Rated Voltage upto 1000V IS 13340 (Part 1) : 2012
224 Shunt Power Capacitors of the Non-Self Healing Type for AC System having A Rated Voltage upto and including 1000 V Part 1 General Performance Testing and Rating IS 13585 (Part-1): 2012
225 AC Motor Capacitors IS 2993: 1998
  Chemicals, Fertilizers, Polymers & Textiles  
226 Caustic Soda-Specification IS 252:2013
227 Boric Acid-Specification IS 10116: 2015
228 Poly Aluminium Chloride IS 15573: 2018
229 Acetic Acid IS 695: 2020
230 Aniline, Technical IS 2833: 2019
231 Methanol (Methyl Alcohol) IS 517: 2020
232 Specification for Phthalic Anhydride, Technical IS 5158: 1987
233 Pyridine IS 8058: 2018
234 Gamma Picoline IS 16113: 2013
235 Beta Picoline IS 16112: 2013
236 Morpholine IS 12084
237 Sodium Sulphide, Technical IS 297: 2001
238 Potassium Carbonate, Anhydrous IS 7129: 2021
239 Acetone IS 170: 2020
240 Phosphorous Trichloride, Pure and Analytical Reagent IS 4581
241 Phosphorous Pentachloride, Technical IS 11744: 2020
242 Phosphorous Oxychloride, Technical IS 11657: 2020
243 Stabilized Hydrogen Peroxide IS 2080: 2021
244 Precipitated Barium Carbonate, Technical IS 3205:1984
245 Precipitated Barium for Ceramic and Glass Industry IS 12928:1990
246 Sodium Formaldehyde Sulphoxylate IS 4505:2015
247 Sodium Tripolyphosphate, Anhydrous, Technical IS 6100:2021
248 n-Butyl Acrylate IS 14709:1999
249 Ether IS 336:2021
250 Ethylene Glycol IS 5295:2023
251 Toluene IS 537:2011
252 Terephthalic Acid IS 15030:2022
253 Methyl Acrylate IS 14707:1999
254 Ethyl Acrylate IS 14708:1999
255 Vinyl Acetate Monomer IS 12345:1988
256 Styrene (Vinyl Benzene) IS 4105:2023
257 Maleic Anhydride, Technical IS 5149:2020
258 Acrylonitrile IS 12540:2023
259 100 Percent Polyester Spun Grey and White Yarn (PSY) IS 17265:2023
260 Polyester Continuous Filament Fully Drawn Yarn (FDY) IS 17261:2022
261 Polyester Industrial Yarn (IDY) IS 17264:2022
262 Polyester Partially Oriented Yarn (POY) IS 17262:2022
263 Polyester Staple Fibres (PSF) IS 17263:2022
264 Polyethylene Material for moulding and extrusion for LDPE, LLDPE and HDPE IS 7328:2020
265 Styrene-Butadiene Rubber Latex IS 11356:2020
266 Linear Alkyl Benzene IS 12795:2020
267 Synthetic Micro-Fibres for use in Cement Based Matrix IS 16481:2020
268 Ethylene Vinyl Acetate (EVA) Copolymers IS 13601:1993
269 3(N, N-DiEthyl) Aminophenol IS 7686:2020
270 Methylene Chloride (Dichloromethane) IS 4566:2020
271 Red Phosphorus IS 2012:2006
272 Acrylonitrile Butadiene Styrene (ABS) IS 17077:Part 1:2022
273 Ethylene Dichloride IS 869:2020
274 p-Xylene IS 17370:2023
275 Polycarbonate IS 14434:2023
276 Polyurethanes IS 17397 (Part 1) : 2020 / ISO 16365-1 : 2014
277 Vinyl Chloride Monomer IS 17442:2020
  Kitchen Appliances  
278 Hand held Blender IS 302(Part2/Section 14):2009
279 Domestic Electric Food Mixer (Liquidizers and Grinders) and Centrifugal Juicer IS 4250:1980
  Domestic Water Heaters for use with LPG  
280 Instantaneous Domestic Water Heater for use with Liquefied Petroleum Gas IS 15558:2005
  Air Conditioner and its related Parts, Hermetic Compressor and Temperature Sensing Controls  
281 Room Air Conditioners-Specification Part 1 Unitary Air Conditioners IS 1391 (Part-1):2023
282 Room Air Conditioners-Specification Part 2 Split Air Conditioners IS 1391 (Part-2):2023
283 Ducted and Package Air Conditioners IS 8148:2018
284 Finned type Heat Exchanger for Room Air Conditioner IS 11329:2018
285 Hermetic Compressor-Specification IS 10617:2018
  Plugs and Socket-Outlets and Alternating Current Direct Connected Static Prepayment Meters for Active Energy  
286 Plugs and socket-outlets of Rated Voltage up to and including 250 Volts and Rated current up to and including 16 amperes IS 1293:2019
287 Alternating Current Direct Connected Static Prepayment Meters for Active Energy (Class 1 and 2) IS 15884:2010
  Domestic Gas Stoves for use with Liquefied Petroleum Gases  
288 Domestic Gas Stoves for use with Liquefied Petroleum Gases IS 4246:2002
  Transparent Float Glass  
289 Transparent Float Glass IS 14900: 2018
  Domestic Pressure Cooker  
290 Domestic Pressure Cooker IS 2347:2017
  Cables  
291 Specification for PVC Insulated (Heavy Duty) Electric Cables Part 1 For Working Voltages up to and Including 1100V IS 1554:Part 1:1988 (Reaffirmed Year : 2020 )
292 Specification for PVC Insulated (Heavy Duty) Electric Cables Part 2 For Working Voltages from 3.3 kV up to and Including 11kV IS 1554(Part 2):1988
293 Crosslinked polyethylene insulated Thermoplastics sheathed cables-Specification Part 2 for working voltages from 3.3 kV up to and including 33 kV IS 7098 (Part 2):2011
294 Cross-linked polyethylene insulated Thermoplastics sheathed cables-Part 3 For Working Voltages from 66kV up to and including 220 kV IS 7098 (Part 3):1993
295 Aerial Bunched Cables-For Working Voltages Up to and Including 1100 Volts-Specification IS 14255:1995
296 Specification for Elastomer Insulated Cables Part 2 For Working Voltages form 3.3kV Up to and Including 33kV IS 9968 (Part 2):2002
297 Specification for Thermocouple Compensating Cables IS 8784:1987
298 Welding Cables-Specification IS 9857:1990
299 Elastomer Insulated Flexible Cables for Use in Mines-Specification IS 14494:2019
300 Specification for Flexible Cables for Miners Cap-Lamps IS 2593:1984
301 Specification for Shot Firing Cables (for use other than in sharts) IS 5950:1984
302 Halogen Free Flame Retardant (HFFR) Cables for Working Voltages Up to and Including 1100 V-Specification IS 17048:2018
  Rubber Hose for Liquefied Petroleum Gas (LPG)  
303 Rubber Hose for Liquefied Petroleum Gas (LPG)-Specification Part 1 Industrial Application IS 9573(Part 1):2017
304 Rubber Hose for Liquefied Petroleum Gas (LPG)-Specification Part 2 Domestic and Commercial Application IS 9573(Part 2):2017
  Aluminium Foil  
305 Aluminium and Aluminium Alloy Bare Foil for Food Packaging IS 15392:2003
  Non-Electric Toys  
306 Non-Electric Toys IS 9873 (Part-1):2019, IS 9873 (Part-2):2017, IS 9873 (Part-3):2020, IS 9873 (Part-4):2017, IS 9873 (Part-7):2017, IS 9873 (Part-9):2017
  Electric Toys  
307 Electric Toys IS 15644:2006
  Flat Transparent Sheet Glass  
308 Flat Transparent Sheet Glass IS 2835:1987
  Safety Glass  
309 Safety Glass-Specification Part-1 Architectural, Building and General uses IS 2553 (Part-1):2018
310 Safety Glass-Specification Part-2 For Road Transport IS 2553 (Part-2):2019
  Woven Sacks  
311 HDPE or PP Woven Sacks for packaging 50 kg Food Grains IS 14887:2014
312 HDPE or PP Woven Sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg Food Grains IS 16208:2015
313 HDPE or PP Woven Sacks for packaging 50 kg or 25 kg Sugar IS 14968:2015
314 HDPE or PP Woven Sacks for filling Sand IS 14252:2015
  Butterfly Valves  
315 Butterfly Valves for general purpose IS 13095:2020
  Reflectors for Bicycles  
316 Retro-reflective Devices IS/ISO 6742 (Part-2):2015
  Paper  
317 Plain Copier Paper IS 14490:2018
  Cattle Feeds  
318 Compounded Feeds for Cattle IS 2052:2023
  Automobile Wheel Rim Component  
319 Light Alloy Wheel Rims IS 16192 (Part-1):2014
320 Sheet Metal Wheel Rims IS 16192 (Part-2):2014
321 Spoke Wheel Rims IS 16192 (Part-3):2018
322 Wheels for Passenger Cars IS 9436:2018
323 Wheels or Rims for Trucks and Buses IS 9438:2018
  Footwear  
324 Personal protective equipment Part-4 Occupational Footwear IS 15298 (Part-4):2017
325 Personal protective equipment Part-3 Protective Footwear IS 15298 (Part-3):2018
326 Personal protective equipment Part-2 Safety Footwear IS 15298 (Part-2):2016
327 Sports footwear IS 15844:2010
328 Leather safety footwear with direct moulded polyvinyl chloride (PVC) sole IS 14544:2022
329 Leather safety footwear having direct moulded rubber sole IS 11226:1993
330 Moulded plastics footwear-Lined or Unlined polyurethane boots for general industrial use IS 16645:2018
331 Footwear for men and women for municipal scavenging work IS 16994:2018
332 Industrial and protective rubber knee and ankle boots IS 5557:2004
333 Moulded solid rubber soles and heels IS 5676:1995
334 Rubber microcellular sheets for soles and heels IS 6664:1992
335 Solid PVC soles and heels IS 6719:1972
336 PVC sandal IS 6721:2023
337 Rubber Hawai Chappal IS 10702:2023
338 Polyvinyl chloride(PVC) industrial boots IS 12254:2021
339 Polyurethane sole, semirigid IS 13893:1994
340 Unlined moulded rubber boots IS 13995:1995
341 Leather safety boots and shoes for miners IS 1989 (Part-1):1986
342 Canvas Shoes Rubber Sole IS 3735:1996
343 Canvas Boots Rubber Sole IS 3736:1995
344 Safety Rubber Canvas Boots for Miners IS 3976:2018
345 Antiriot shoes IS 17037:2018
346 Derby shoes IS 17043:2018
347 Slipper, rubber IS 11544:1986
348 High ankle tactical boots with PU-Rubber sole IS 17012:2018
  Press Tool-Punches  
349 Tools for Pressing Part-3 Round Punches with 60 Degrees Conical Head and Reduced Shank IS 4296:Part 3:2015
350 Tools for Pressing Part-2 Punches with Cylindrical Head and Straight or Reduced Shank IS 4296:Part 2:2015
351 Tools for Pressing Part-1 Round Punches with 60 Degrees Conical Head and Straight Shank IS 4296:Part 1:2016
  Helmet for riders of Two Wheeler Motor Vehicles  
352 Helmet for riders of Two Wheeler Motor Vehicles IS 4151:2015
  Refrigerating Appliances  
353 Household Refrigerating Appliances-Characteristics and Test Methods Part-1 General Requirements IS 17550:Part 1:2021
354 Freezers IS 7872:2020
  Centrifugally cast (Spun) iron pipes  
355 Centrifugally cast (Spun) iron pressure pipes for water, gas and sewage IS 1536:2023
356 Centrifugally cast (Spun) iron spigot and socket soil, waste, ventilating and rainwater pipes, fittings and accessories IS 3989:2009
357 Hubless centrifugally cast (Spun) iron pipes, fittings and accessories-Spigot series IS 15905:2011
  Flux Cored (Tubular) Electrodes  
358 Flux Cored (Tubular) Electrodes for Gas Shielded and Self-Shielded Metal Welding of Carbon or Carbon- Manganese Steel IS 15769:2008
  Sewing Machine  
359 Household Zig-Zag Sewing Machine Head IS 15449:Part1:2004
  PVC Pipes and Fittings for Potable Water Supply  
360 Unplasticized PVC pipes for water supplies (Type-A) IS 4985:2021
361 Unplasticized polyvinyl chloride (PVC-U) screen and casing pipes for bore or tubewells IS 12818:2010
362 Fabricated PVC-U fittings for potable water supplies IS 10124 (Parts 1 to 13):2009
363 Injection moulded PVC socket fittings with solvent cement joints for water supplies IS 7834: Part 1:1987
364 Chlorinated polyvinyl chloride (CPVC) pipes for potable hot and cold water distribution supplies IS 15778:2007
365 Oriented unplasticized polyvinyl chloride (PVC-O) pipes for water supply IS 16647:2017
  PVC Pipes and Fittings in Agriculture and in Suction and Delivery Lines of Agricultural Pumps and Rain Water Systems  
366 UPVC pipe fittings to be used with the UPVC pipes in thesuction and delivery lines of agricultural pumps IS 13593:1992
367 Unplasticized PVC pipes for water supplies (Type-B) IS 4985:2021
368 Unplasticized PVC pipes for use in suction and delivery lines of agricultural pump sets IS 12231:1987
369 Flexible PVC pipes polymer reinforced thermoplastic hoses for suction and delivery lines of agricultural pumps IS 15265:2003
370 Unplasticized polyvinyl chloride (PVC-U) pipes for soil and discharge system for inside and outside buildings including ventilation and rain water system IS 13592:2013
  PVC Pipes and Fittings for Drainage and Sewarage System  
371 Structured-Wall plastics piping systems for non-pressure drainage and sewerage Specification Part 1 Pipes and fittings with smooth external surface Type A IS 16098 Part 1:2013
  Water Treatment System  
372 Reverse Osmosis (RO) Based Point-Of-Use (POU) Water Treatment System IS 16240:2023
  Jute Bag  
373 A- twill Jute Bag IS 1943:1995
374 B-twill Jute bags for packing foodgrains IS 2566:1993
375 Jute bags for packing 50 Kg foodgrains IS 12650:2018
376 Jute bags for packing 50 Kg sugar IS 15138:2010
377 Light weight jute sacking bags for packing 50 Kg foodgrains IS 16186:2014
378 Jute bags for packing up to 30 Kg foodgrains IS 16372:2015
379 Polymeric strip or geostrip used as soil reinforcement in retaining structures IS 17372:2020
  Geo Textiles  
380 Laminated High Density Polyethylene (HDPE) Woven Geomembrane for Water Proof Lining IS 15351:2015
381 Poly Vinyl Chloride (PVC) Geomembranes IS 15909 : 2020
382 Needle punched non-woven geobags IS 16653:2017
383 Polypropylene Multifilament woven geobags IS 16654:2017
384 Jute Geotextiles Part 1 Strengthening of Sub-Grade in Roads IS 14715 (Part 1): 2016
385 Jute Geotextiles Part 2 Control of Bank Erosion in Rivers and Waterways IS 14715 (Part 2): 2016
386 Open Weave Coir Bhoovastra IS 15869 : 2020
387 Geotextiles used in sub-grade separation in pavement structures IS 16391 : 2015
388 Geotextiles used in Subsurface Drainage Application IS 16393 : 2015
389 Geotextiles used in Sub-grade Stabilisation in pavement structures IS 16362:2020
390 High Density Polyethylene (HDPE) Geomembranes for lining IS 16352 : 2020
391 Geotextiles for permanent erosion control in hard armor systems IS 16392 : 2015
392 Geogrids for flexible pavements IS 17371:2020
393 Geogrids used in reinforced soil retaining structures IS 17373:2020
394 Reinforced HDPE membrane for effluents and chemical resistance lining IS 17374:2020
395 Geosynthetics - Geocells - Specification Part 1 Load Bearing Application IS 17483 (Part 1): 2020
396 Geosynthetics - Geocells - Specification Part 2 Slope Erosion Protection Application IS 17483 (Part 2): 2020
397 Geotextiles used as protection (or cushioning) materials IS 16090:2013
  Protective Textiles  
398 Curtains and Drapes IS 15741: 2007
399 Upholstered composites used for non-domestic furniture IS 15768 : 2008
400 Protective clothing for firefighters IS 16890 : 2018
401 Protective gloves for firefighters IS 16874 : 2018
402 Protective clothing for industrial workers exposed to heat IS 15748 : 2022
403 Clothing made of limited flame spread materials and material assemblies affording protection against heat and flame IS 15748: 2007
404 High visibility Warning Clothes IS 15809 : 2017
405 Protective Clothing for use in welding and allied processes IS 16655 : 2017
406 Tactical 3 point sling IS 16725 : 2018
407 Pouch for ammunition and grenades made of disruptive pattern nylon-66 IS 16726 : 2018
408 Water-proof multipurpose rain poncho IS 17286 : 2019
  Flame- Producing Lighters  
409 Lighters- Safety Specifications IS/ISO 9994:2018
410 Utility Lighters – Safety Specifications IS/ISO 22702:2018
  Welding Rods and Electrodes  
411 Covered electrodes for manual metal arc welding of carbon and carbon manganese steel IS 814 : 2004
412 Welding rode and bare electrodes for gas shielded arc welding of structural steel IS 6419 : 1996
  Smart Meters  
413 A.C. Static Direct Connected Watt Hour Smart Meter Class 1 and 2 IS 16444 : Part 1 : 2015
414 A.C. Static Transformer Operated Watt Hour and Var-Hour Smart Meters, Class 0.2S, 0.5S and 1.0S IS 16444:Part 2:2017
  Viscose Staple Fibres  
415 Viscose Staple Fibres IS 17266:2019
  Insulated Flask, Bottles and Containers  
416 Insulated Flask for Domestic Use IS 17790 : 2022
417 Domestic Stainless steel vacuum flask/bottle IS 17526:2021
418 Insulated Container for Food Storage IS 17569:2021
  Potable Water Bottles  
419 Potable Water Bottles (Copper, Stainless Steel, Aluminum) IS 17803: 2022
  Resin treated compressed wood laminates  
420 Resin treated compressed wood laminates (compregs) – For electrical purposes IS 3513 (Part 1) : 1989
421 Resin treated compressed wood laminates (compregs) – For chemical purposes IS 3513 (Part 2) : 1989
422 Resin treated compressed wood laminates (compregs) – For general purposes IS 3513 (Part 3) : 1989
  Bolts, Nuts and Fasteners  
423 Hexagon Head Bolts, Screws and Nuts of product Grade C Hexagon Head Bolts (Size Range M 5 to M 64) IS 1363 (Part 1) :2019
424 Hexagon Head Screw (Size ranges from M 5 to 64) IS 1363 (Part 2) :2018
425 Hexagon Head Bolts, Screws and Nuts of product Grade C – Hexagon Nuts (Size Range M5 to M64) IS 1363 (Part 3) : 2018
426 Hexagon Head Bolts, Screws and Nuts of product Grades A and B – Hexagon Head Bolts (Size Range M 1.6 To M 64) IS 1364 (Part 1) : 2018
427 Hexagon Head Bolts, Screws and Nuts of Product Grades A and B – Hexagon Head Screws (Size Range M 1.6 to M 64) IS 1364 (Part 2) : 2018
428 Indicating Bolts for use in public baths and lavatories IS 4621 : 1975
429 Flush Bolts IS 5187: 1972
430 Fasteners – Threaded Steel Fastener – Step Bolts for Steel Structures IS 10238 : 2001
431 Fasteners – Threaded Steel Fasteners – Hexagon Head Transmission Tower Bolts IS 12427 : 2001
432 High Strength Structural Bolts IS 3757 : 1985
433 Tower Bolts- Non-ferrous metal IS 204 (Part 2) : 1992
434 Tower Bolts- Ferrous metals IS 204 (Part 1) : 1991
435 Stainless Steel Sliding Door Bolts (Aldrops) for use With Padlocks IS 15834 : 2022
436 Non-ferrous metal sliding door bolts (aldrops) for use with padlocks IS 2681: 1993
437 Mild steel sliding door bolts for use with padlocks IS 281 : 2009
438 Wrought Aluminium Alloy Bolt and Screw Stock for General Engineering purposes IS 1284 : 1975
439 Sliding locking bolts for use with padlocks IS 7534: 1985
440 Stainless steel Tower Bolts IS 15833 : 2009
441 High Strength Structural Nuts IS 6623 : 2004
  Cookware and Utensils  
442 Stainless Steel Cookware IS 14756 : 2022
443 Wrought Aluminium Utensils IS 1660:2009
444 Stainless Steel Sinks for Domestic Purposes IS 13983:1994
445 Round Open Top Sanitary Cans for Foods and Drinks – Tinplate IS 9396 (Part 1) : 1987
446 Aluminium Beverage Cans IS 14407:2023
  Domestic Gas Stoves for use with Piped Natural Gas  
447 Domestic Gas Stoves for use with Piped Natural Gas (PNG) IS 17153:2019
  Fire Extinguishers  
448 Portable Fire Extinguishers IS 15683:2018
449 Wheeled Fire Extinguishers IS 16018:2012
  Electric Ceiling Type Fans  
450 Electric Ceiling Type Fans IS 374:2019
  Wood Based Boards  
451 Block Boards IS 1659:2004
452 Prelaminated particle boards from wood and other Lignocellulosic material IS 12823:2015
453 Particle boards of wood and other lignocellulosic materials (medium density) for general purpose IS 3087:2005
454 Medium density fibre boards for general purpose IS 12406:2021
455 Veneered particle boards IS 3097:2006
  Cast Iron Products  
456 Cast iron man hole covers and frames IS 1726:1991
457 Cast iron/ductile iron drainage pipes and pipe fittings for over ground non-pressure pipelines socket and spigot series IS 1729:2002
458 Malleable cast iron pipe fittings IS 1879:2010
459 Cast iron single faced thimble mounted sluice gates IS 13349:1992
460 Vertically cast – iron pressure pipes for water, gas and sewage IS 1537:1976
461 Grey iron castings IS 210:2009
  Solar DC Cable and Fire Survival Cable  
462 Electric Cable for Photovoltic Systems for rated voltage 1500V DC IS 17293:2020
463 Thermosetting Insulated, Fire Survival Cables for working voltage upto and including 1100V AC and 1500V DC IS 17505(Part 1): 2021
  Metals and Alloys  
464 Cast aluminum and its alloys – Ingots and castings for general engineering purposes IS 617:1994
465 High-purity primary aluminum ingot for remelting for special applications IS 11890:1987
466 Aluminum alloy ingots for remelting for general engineering purpose IS 6754:1972
467 Primary aluminium ingots for remelting for general engineering purpose IS 2590 : 1987
468 Aluminum ingots billets and wire bars (EC GRADE) IS 4026:2023
  Copper  
469 Copper IS 191:2007
  Nickel  
470 Nickel Powder IS 7506:1987
  Plywood and Wooden flush door shutters  
471 Plywood for general purposes IS 303:1989
472 Wooden flush door shutters (solid core type) – Plywood face panels IS 2202 (Part-1) :1999
473 Marine plywood IS 710 : 2010
474 Fire retardant plywood IS 5509 : 2021
475 Veneered decorative plywood IS 1328:1996
476 Wooden flush door shutters (cellular and hollow core type) – Particle board and hardboard face panels IS 2191 (Part 2): 2022
477 Wooden flush door shutters (cellular and hollow core type) – Plywood face panels IS 2191 (Part 1): 2022
478 Wooden Flush Door Shutters (Solid core type) – Particle board, High Density Fibre Board, Medium Density Fibre Board and Fibre Hardboard Face Panels IS 2202 (Part 2): 2022
479 Plywood for concrete shuttering works – Specification IS 4990 : 2011
480 Structural plywood – Specification IS 10701 : 2012
  Flux Cored Solder Wire  
481 Flux Cored Solder Wire IS 1921: 2005
  Miscellaneous Steel Products  
482 Bar or wire Wrapped Steel Cylinder Pipes with Mortar Lining and Coating Including Specials IS 15155 : 2020
483 High Strength deformed stainless steel bars and wires for concrete reinforcement IS 16651 : 2017
484 Steel Pipe Flanges IS 6392 : 2020
485 Stainless steel tubes for the food and beverage industry IS 6913:1973
  Aluminium and Aluminium Alloy Products  
486 Aluminium alloy tubes for irrigation purposes -welded tubes IS 7092 (Part 1):1992
487 Aluminium alloy tube for irrigation purposes – extruded tube IS 7092 (Part 2):1987
488 EC Grade Aluminium Rod produced by Continuous Casting and Rolling IS 5484:1997
489 Wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) IS 733:1983
490 Wrought aluminium and aluminium alloys, forging stock and forgings for general engineering purposes IS 734:1975
491 Wrought aluminium and aluminium alloy plate for general engineering purposes IS 736:1986
492 Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes IS 737:2008
493 Wrought aluminium and aluminium alloy wire for general engineering purposes IS 739:1992
494 Wrought aluminium and aluminium alloy rivet stock for general engineering purposes IS 740:1977
495 Wrought aluminium and aluminium alloy bars, rods, tubes, sections, plates and sheets for electrical applications IS 5082:1998
496 Aluminium and aluminium alloy foil for pharmaceutical packaging IS 16011:2012
497 Aluminium composite panel IS 17682:2021
498 Wrought aluminium and aluminium alloys- Extruded round tube and hollow sections for general engineering purposes IS 1285:2002
499 Wrought Aluminium Wire for Electrical Purposes IS 2067:1975
500 Wrought aluminium and aluminium alloys for manufacture of utensils IS 21:1992
501 Corrugated Aluminium Sheet IS 1254:2007
502 Aluminium alloy forging stock and forgings (Alloy 24345) for aerospace applications IS 7902:2001
  Self- Contained Drinking Water Coolers  
503 Self-Contained Drinking Water Coolers – Energy Consumption and Performance IS 1475 (Part 1) : 2001
  Precision Roller and Bush Chains, attachments and associated chain sprockets  
504 Short – Pitch Transmission Precision Roller and Bush Chains, Attachments and Associated Chain Sprockets IS 2403 :2014 / ISO 606 : 2004
  Medical Textiles  
505 Sanitary napkins IS 5405 : 2019
506 Disposable baby diaper IS 17509 : 2021
507 Reusable Sanitary pad/ Sanitary Napkin/ Period Panties IS 17514 : 2021
508 Shoe covers IS 17349 : 2020
509 Dental Bib or Napkins IS 17354 : 2020
510 Bed sheet and Pillow Cover IS 17630 : 2021
  Agro Textiles  
511 Polypropylene Spun Bonded Non—Woven Crop Cover and Fruit Skirting Bags for Agriculture and Horticulture Applications IS 16718 : 2021
512 Insect nets for Agriculture and Horticulture purpose IS 16513:2016
513 Jute Agro textiles for Growth of Plants and Suppression of Weeds IS 17070 : 2019
514 Woven Ground covers for Horticulture Application IS 16202 : 2014
515 High Density Polyethylene (HDPE) woven beds for vermiculture IS 15907:2010
516 Sapling bags for growth of seedling /sapling IS 16089:2013
517 High Density Polyethylene (HDPE) laminated woven lay flat tube for irrigation purpose IS 16190 : 2014
518 Nylon Knitted seamless gloves for tobacco harvesters IS 16390 : 2015
519 High density polyethylene (HDPE) laminated woven lay flat tube for use in mains and submains of drip irrigation system IS 16627:2017
520 Propylene Spun bonded non—woven mulch mat for agriculture and horticulture applications IS 17355:2020
521 Windshield nets for agriculture and horticulture purpose IS 17356 : 2020
522 Harvest nets for agriculture and horticulture purposes IS 17357 : 2020
523 Fencing nets for agriculture and horticulture purposes – made from extruded polymer mesh IS 17358 (Part 1) : 2020
524 Fencing nets for agriculture and horticulture purposes -made from mono filament yarns and combination of tape and mono filament yarns IS 17358 (Part 2) : 2020
525 Plant Support Nets for Agriculture and Horticulture Purposes IS 17513 : 2020
526 High Density Polyethylene (HDPE) Laminated Woven Lay Flat Tube and Fittings for use in Rain Irrigation System IS 17728 : 2021
527 Flexible Water Storage Tank for Agriculture and Horticulture Purposes IS 17729 : 2021
528 Hail Protection Nets for Agriculture and Horticulture Purposes- Warp Knitted Hail Protection Nets IS 17730 (Part 1) : 2021
529 Hail Protection Nets for Agriculture and Horticulture Purposes – Woven Hail Protection Nets IS 17730 (Part 2) : 2021
530 Laminated Woven Orchard Protection Covers IS 17731 : 2021
  Copper Products  
531 Copper Wire Rods for Electrical Applications IS 12444:2020
532 Copper Rods and Bars for Electrical Purposes IS 613:2000
533 Copper strip for electrical purposes IS 1897:2008
534 Copper rods and bars for general engineering purposes IS 4171:1983
535 Solid drawn copper and copper alloy tubes for condensers and heat exchangers IS 1545: 1994
536 Solid drawn copper tubes for general engineering purposes IS 2501:1995
537 Copper Tubes for plumbing- Specification IS 14810:2000
538 Wrought Copper Tubes for Refrigeration and Air- Conditioning Purpose IS 10773:1995
539 Copper wires for general engineering purposes IS 4412:1981
  Drums and Tins  
540 Drums, Large Open Top IS 13997:2014
541 Drums Large, Fixed Ends – Grade A IS 1783 (Part 1) :2014
542 Drums, Large, Fixed Ends – Grade B IS 1783 (Part 2) :2014
543 Steel Drums (Galvanized and Ungalvanized) IS 2552:1989
544 Bitumen Drums IS 3575:1993
545 Square Tins for Solid Products IS 916:2000
546 Square Tins – 15 Kilograms or litre for Ghee, Vanaspati, Edible Oils and Bakery IS 10325:2000
  Door Fittings  
547 Door closers (pneumatically regulated) for light doors weighing up to 40 kg IS 6343:1982
548 Door closers, concealed type (hydraulically regulated) IS 14912:2001
549 Hydraulically Regulated Door Closers IS 3564:1995
550 Floor springs (hydraulically regulated) for heavy doors IS 6315:1992
551 Rim Latches IS 1019:1974
552 Door Handles IS 208:2020
553 Door handles for mortice lock (vertical type) IS 4992:1975
  Bottled Water Dispenser  
554 Bottled water dispensers IS 17681:2022
  Helmet for Police Force, Civil Defence and Personal Protection  
555 Non-metal helmet for firemen and civil defence personnel IS 2745:1983
556 Industrial safety helmets IS 2925:1984
557 Non- metal helmet for Police Force IS 9562:1980
  Steel Wires or Strands, Nylon or Wire Ropes and Wire mesh  
558 Steel Wire Ropes for General Engineering Purposes IS 2266 : 2019
559 Steel Wire Suspension Ropes for Lifts, Elevators and Hoists IS 2365 : 2018
560 Stranded steel wire ropes for winding and man-riding haulages in mines IS 1855:2022
561 Steel Wire Rope for haulage IS 1856:2005
562 Hot Dip Galvanized Stay Strand IS 2141:2000
563 Wire Ropes Used in Oil Wells and Oil Well Drilling IS 4521:2001
564 Braided Nylon Ropes for Mountaineering Purposes IS 6590:1972
565 Galvanized Steel Barbed Wire for Fencing IS 278:2009
566 Galvanized Steel Wire or Galvanized Steel Wire with polymer coating IS 16014:2018
  Material Measure of length  
567 Legal Metrology – Material Measure of length – Woven metallic and glass fibre tape measures IS 1269(Part 1) : 1997
568 Legal Metrology-Material Measure of length-Steel tape measures IS 1269(Part 2) : 1997
  Polyethylene Woven Sacks  
569 Textile-High Density Polyethylene (HDPE) /Polypropylene (PP) Woven Sacks for Packaging Fertilizers IS 9755 : 2021
570 Textile-High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for Packaging of 50 kg Cement IS 11652 : 2017
571 Textiles-Polypropylene (PP) Woven, Laminated, Block Bottom Valve Sacks for Packaging of 50 kg Cement IS 16709: 2017
572 Textiles-High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for Packaging of 25 kg Polymer Materials IS 16703: 2017
573 Textiles-Polypropylene (PP)/ High Density Polyethylene (HDPE) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution IS 17399: 2020
  Safes, Safe Deposit Locker Cabinets and key locks  
574 Safes IS 550 (Part 1): 2014
575 Safe deposit locker cabinets IS 5244 : 2020
576 Key locks for security equipment IS 17566: 2021
  Hinges  
577 Stainless steel butt hinges IS 12817: 2020
578 Steel Butt Hinges IS 1341:2018
579 Non-ferrous metal butt hinges IS 205:1992
580 Tee and strap hinges IS 206:2010
581 Parliament hinges IS 362:1991
582 Continuous (Piano) hinges IS 3818:1992
583 Steel back flap hinges IS 3843: 1995
584 Double-acting spring hinges IS 453:1993
585 Cabinet hinges IS 18297:2023
  Cycle and Rickshaw Tyres and Tubes  
586 Cycle and Rickshaw Pneumatic Tyres IS 2414:2005
587 Cycle-Rubber Tubes (Moulded or Jointed) IS 2415 :2015
  Rubber Gaskets for Pressure Cookers  
588 Rubber Gaskets for Pressure Cookers IS 7466 :2023

Frequently Asked Questions

Products such as electrical appliances, cement, steel, household items, automotive components, and many others fall under the mandatory ISI Certification scheme.

The ISI Certification is valid for two years. After that, needs to renew.

Yes, imported products falling under the mandatory ISI Certification scheme need to be certified before they can be sold in the Indian market.

Yes, depending on your product, it may require multiple types of ISI Certification if it falls under various categories or standards.
Connect with our experts
  • +91
  • +1
  • +42
  • +86
or
whatsapp +919811803136
|
+911140566341

products cover under this certificate

See all products
Connect with our experts
  • +91
  • +1
  • +42
  • +86
or
whatsapp +919811803136
|
+911140566341